Back to Design for Laser Manufacture

Submitting DLM material

Providing material for the Design for Laser Manufacture website

AILU members and non-members alike are invited to submit material for display on the Design for Laser manufacture site. Only material released for the public domain should be submitted.

Pictures

Examples showing laser processing and laser fabricated components

Pictures should be provided in the form of originals or electronic files (about 1000 x 1000 pixels or greater), together with (for each):

  1. (Pre-embedded) A company logo stamp or watermark, preferably discrete, if desired.
  2. A suitable title.
  3. A description (<100 words) of the process or component, including the benefits of laser use. An indication of the laser and process parameters would be particularly helpful.
  4. The contact details of the originator and/or the owner of copyright.

Video clips

Examples showing laser processes or laser manufacture

File size is a particularly important issue for video clips on web sites, insomuch as large files can take a long time to download, but at the present time there are no restrictions on the size or format of submissions.

For each clip submitted we require:

  1. (Pre-embedded) A company logo stamp or watermark, preferably discrete, if desired.
  2. A suitable title.
  3. A short description (< 100 words) of the process or component being manufactured, including the benefits of laser use. An indication of the laser and process parameters would be particularly helpful.
  4. (optional) An extended description of the content of the video.
  5. The contact details of the originator and/or the owner of copyright, if known.


Documents

Documents describing a laser process, providing process data (speed etc) and or design requirements should be submitted in PDF format, preferably produced with under ‘smallest file size, optimized for web site’ settings. At the present time there are no restrictions on file size.

For each document submitted we require:

  1. Company contact details to be incorporated in the document, together with any applicable copyright marking.
  2. The document to have a suitable title.
  3. A short description and a full description of the document content to be provided.
  4. (Optional) An extended description of the content of the document.


If you are unable to submit material at the present time (e.g. awaiting clearance or the supply of technical content) it would help us in our planning if you would please let us know by filling in our web form.

Address for correspondence

Material can be emailed to dlm@ailu.org.uk or mailed to:
Design for Laser Manufacture
AILU
Oxford House
100 Ock Street
Abingdon, Oxon. OX14 5DH

Banner Information

Once the material is approved we will need a banner to place below the material. The banner must be in .jpg or .gif format, a maximum of 390 pixels wide by 60-70pixels high a resolution of 72 pixels per inch.


Back to top